The ACiQ AQ-GLXS3BN3610 is a cooling-only condenser unit. Providing a 13.4 SEER2 efficiency with a single stage, reciprocating compressor, the AQ-GLXS3BN3610 is an inexpensive condenser to cool your home when paired with an AC coil.
Features
- This furnace is ideal to heat a medium-sized house (depending on climate)
- 80,000 BTU 80% efficient natural gas furnace
- Requires metal flue venting
- Complies with Clean Air Act New Refrigerant Requirements
- Can be used in the upflow or horizontal orientation
- Can be converted to an LP furnace with a conversion kit (sold separately)
- Innovative design for electrical efficiency, safety, and lower sound output
80,000 BTU
The AQ-GR9S800804CN ACiQ gas furnace is 80,000 BTU's. This BTU count is a measure of the input of the furnace per hour, while the output of this furnace is 64,000 BTU's (80,000 X 80% AFUE) per hour. In ideal climate conditions, this 80,000 BTU furnace is usually used to heat a medium-size house.
80% Efficiency Rating
The AQ-GR9S800804CN ACiQ gas furnace is 80% efficient, which meets the market's minimum furnace efficiency standards. This means that 80% of the gas going into the furnace is used to heat your home and the remaining 20% is lost out of the flue venting. Please note that all 80% furnaces must be vented using metal flue venting, while any furnace with an efficiency of 90% or higher must be vented using plastic/PVC venting.
Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.
Single Stage Furnace
The AQ-GR9S800804CN ACiQ gas furnace is a single stage furnace has only one heat output. Regardless of the indoor temperature, this furnace will burn at 100% output whenever the thermostat calls for it. Like a light switch, this furnace's burner will either be on or off and nothing in between. A single stage furnace is the standard efficient furnace since every time your furnace turns on the furnace uses the same amount of energy.
Natural Gas or LP Furnace
From the factory, the AQ-GR9S800804CN runs on natural gas. However all ACiQ gas furnaces can be converted to propane using the furnace's corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.
9-Speed ECM Blower Motor
Instead of the last generation PSC blower motor, the AQ-GR9S800804CN utilizes a 9-speed ECM motor, which uses less power and provides smarter air circulation. All of this causes an overall increase in the electrical efficiency of your furnace, which saves you money.
Warranty
With installation that follows your state and local codes and with online registration, all ACiQ furnaces come with a 10-year parts and lifetime heat exchanger warranty through the manufacturer.
Durable Hot Surface Ignitor
The hot surface ignitor on modern ACiQ furnaces are more durable than previous designs, decreasing related issues and lowering maintenance costs. These hot surface ignitors are also more efficient than standing pilot and older HSI designs, saving you even more money.
Self-Diagnostic Control Board
The ACiQ brand has improved technology from years of production experience, allowing for a long-lasting product that rarely has any issues. However, if something does go wrong on the furnace, the control board has a set of sensors that allow it to diagnose basic issues, allowing for easy troubleshooting and to notify the owner if basic maintenance or warranty work is recommended. This increases the overall safety of the unit, for the furnace itself and the occupants of the home where it is installed.
Heavy Gauge Steel Cabinet
The heavy-gauge steel cabinet on new ACiQ furnaces provide adequate protection to the internal mechanisms of the unit. The cabinet is also more air-tight than previous models, allowing for a quiet, more economical unit due to losing less heat and preventing more sound from exiting the unit.
Ease of Installation
The value of modern ACiQ furnaces doesn't end at efficiency. Today's ACiQ furnaces feature many different connection options to reduce installation. The AQ-GR9S800804CN model has a more universal design, which consists of its ability to be installed in both an upflow or horizontal configuration. This allows for an easier installation in more locations, from your attic to your basement. The furnace also comes with color-coded low-voltage terminals that allow for a shorter and easier installation time, which decreases installation costs.
Specifications
| 3.5 Ton 21" Width Vertical Evaporator Coil - Cased - R32 |
| Feature |
Spec |
| SKU |
AQ-CAPFA4226C3 |
| Weight (in lbs) |
54.000000 |
| Brand/Manufacturer |
Private Brand |
| Product Features |
New Refrigerant Compliant |
| Configuration |
Upflow / Downflow |
| Refrigerant |
R32 |
| Liquid Line |
3/8" |
| Suction Line |
7/8" |
| Tonnage |
3.5 Ton |
| Style |
A-Coil |
| Height |
26" |
| Width |
21" |
| Depth |
21" |
| Warranty |
10 Year Parts with Online Registration |
| Safety Information |
PROPOSITION 65 WARNING |
| 80,000 BTU 80% AFUE Single Stage Gas Furnace - 21" Width - Upflow/Horizontal |
| Feature |
Spec |
| SKU |
AQ-GR9S800804CN |
| Weight (in lbs) |
120.000000 |
| AHRI Certificate Number |
215358057 |
| Airflow Direction |
Upflow/Horizontal |
| Exhaust Flue Requirement |
Metal |
| Brand/Manufacturer |
Private Brand |
| Product Features |
New Refrigerant Compliant |
| Furnace Efficiency / AFUE |
80% |
| Heating BTU |
80,000 |
| Blower Motor |
9-Speed - ECM |
| Maximum CFM |
1600 |
| Configuration |
Upflow/Horizontal |
| Electrical |
115v 1 Phase 60 Hz |
| Max Breaker Size |
15 Amps |
| Min. Breaker Size |
11.3 Amps |
| Burner Stages |
Single |
| Fuel Type |
Propane, Natural Gas |
| Height |
33 3/8" |
| Width |
21" |
| Depth |
28" |
| Warranty |
Lifetime Heat Exchanger and 10 Years Parts with Online Registration |
| 3 Ton 13.4 SEER2 Single Stage Air Conditioner Condenser - R32 |
| Feature |
Spec |
| SKU |
AQ-GLXS3BN3610 |
| Weight (in lbs) |
151.000000 |
| Brand/Manufacturer |
Private Brand |
| Replaces |
GSX130361, GSXN3N3610 |
| Product Features |
Basic Efficiency, New Refrigerant Compliant |
| Cooling BTU |
36,000 |
| Decibel Level (dBA) |
69 |
| Horsepower |
1/8 HP |
| Refrigerant |
R32 |
| SEER2 (Efficiency) |
13.4 |
| Condenser Stages |
Single Stage |
| Compressor Type |
Scroll |
| Liquid Line |
3/8" |
| Suction Line |
7/8" |
| Liquid Valve Size |
3/8" |
| Suction Valve Size |
7/8" |
| Electrical |
208 / 230 V. 1 Phase 60 Hz |
| Max Breaker Size |
30 Amps |
| Min. Breaker Size |
17.5 Amps |
| Tonnage |
3 Ton |
| Connection |
Sweat |
| Height |
32 1/2" |
| Width |
26" |
| Depth |
26" |
| Warranty |
10 Years Parts Limited Warranty with Online Registration |
Owner's Manual
MOST PRODUCTS SHIP FREE!
NO SALES TAX IN 48 STATES!
100% SATISFACTION GUARANTEE!
