Goodman - 4.0 Tons/46,000 BTU Packaged Heat Pump System- SEER2 13.4 - Single Stage - 208V

Goodman's packaged units are the perfect all-in-one comfort solution for nearly any residential application. The GPHH3 combines a Goodman heat pump, evaporator coil, and Multi-speed ECM blower to provide efficient heating and cooling from a single unit. A scroll compressor provides consistent refrigerant flow, and Goodman's superior coil design is featured to ensure high efficiency regardless of whether you're heating or cooling your home. The GPHH3 even features convenient access panels that make installation and maintenance a breeze. Streamline your comfort today with this Goodman packaged unit.

Specifications

• Product Line: GPHH3
• Product Category: Packaged HVAC Unit
• Operating Mode: Heating and Cooling
• Refrigerant Type: R-410A
• Blower Motor Type: Multi-Speed
• Motor Type: ECM (Electronically Commutated Motor)
• Configuration: Horizontal
• Installation Location: Outdoor
• Compressor Stages: Single Stage
• DOE Regional Compliance: Nationwide
• Capacity: 4.0 Tons
• Cooling Capacity: 46,000 BTU
• Heating Capacity: 43,500 BTU
• Maximum Air Flow: 2,002 CFM
• Minimum Air Flow: 1,337 CFM
• Maximum Sound Level: 80 dB
• SEER (Seasonal Energy Efficiency Ratio): 13.4
• EER (Energy Efficiency Ratio): 10.6
• HSPF (Heating Seasonal Performance Factor): 6.70
• Voltage: 208/230 Volts
• Phase: 1
• Frequency: 60 Hz
• Minimum Circuit Ampacity: 31.7 Amps
• Recommended Breaker Size: 50 Amps
• Product Height: 35 Inches
• Product Width: 66 Inches
• Product Depth: 34 Inches
• Product Weight: 375 Pounds
• Shipping Weight: 387 Pounds
• ETL Listed: Yes
• Energy Star Listed: No
• AHRI Certified: Yes
• ISO Certified: Yes
• AHRI Reference Number: 208842408
• Parts Warranty: 10 Limited Years
• Compressor Warranty: Limited* 10 Years (*specific terms may apply)

Owner's Manual

• Installation Manual
• Spec Sheet
• Warranty
• Parts Manual
• Service Manual

All Goodman products are to be installed in accordance with the manufacturer's installation methods and recommendations by a licensed HVAC-R/electrical/plumbing technician, as required. Failure to do so, may result in voiding the manufacturer's warranty.